Модель ps-we550 инструкция

According to Samsung user manual guidelines, the center speaker should be directly above or below the TV, whichever is closest to ear level from the main viewing position. Every time I go to hit mute and hold button in it says on the sound bar check woofer. So what does this mean when I already pushed in the reset button. It is still blinking blue. The manual is extremely confusing about how to set up each configuration; prepare to spend some time with it. By Darrin Meyer Some Samsung home theater receivers feature integrated 3D technology. The system supports Dolby Digital and DTS surround encoding, and delivers impressive volume levels given its size, as I saw when watching the Blu-ray version of Tron: Legacy. Samsung is not responsible for any direct or indirect damages, arising from or related to use or reliance of the content herein.

Смотрите также: Гипотермический пакет морозко инструкция

Enter the code 9 – 7 – 7. The “TV” key’s programming will be deactivated. That can make some vocals, electric guitars, and fuller-bodied stringed acoustic instruments sound a little thinner than they should, especially if you’re listening to straight stereo music. With this method, the source will be selected by the receiver, and that signal will be routed to the TV. 6 Connect the audio from a source component using a digital optical (TOSLINK) cable if your model does not feature HDMI inputs, such as the HT-C550 and 650 series. Reply This was helpful (0) Collapse — didn’t work Hi thanks fo your clear instructions. Reply This was helpful (0) Collapse — My sub woofer does not power on Is there anything that can be done, or do I need to replace the sub woofer?

Смотрите также: Мелоксикам инструкция по применению цена в самаре

Смотрите также: Подробная инструкция по визе в великобританию

This is a good indicator that you can now press the power button on the remote.)4) The subwoofer Link LED will continue to blink as it establishes a connection with the Sound bar. Reply This was helpful (0) Collapse — Make sure sound bar is off before holding down mute button After pushing the ID button, make sure the sound bar is off. THEN hold the mute button down for 5 seconds. And do i push the power button as Im pushing the mute button or after 5 seconds are up. Subwoofer would not connect. We called Samsung help line. Come to find out we purchased a refurbished sound bar and the serial number has been discontinued. I attempted to send it back but the person that sold the sound bar did not want it back and gave a refund and told us to keep it. There are no HDMI or optical cables in the box, though; you’ll have to supply your own if you want any kind of digital connection. More Speaker Reviews:• LG Tone Studio (HBS-W120)• 808 Audio Canz Glo• Auvio Mini• Braven 2200m• B&O Play Beoplay P2• more Back to top PCMag may earn affiliate commissions from the shopping links included on this page. There’s also very little sense of air or ambience around the instruments and actors; the overall sound is a little bland and unexciting.

Sorry, there was a problem flagging this post. Support Remote controls Remote control for High Definition Terminal new generation and High Definition Personal Video Recorder new generation. Reply This was helpful (1) Collapse — Worked for me!!! Worked for me.Thank you sooooooooo much!!! Was about to buy another soundbar.Thanks again for your assistance. Samsung’s 3D Sound Plus circuitry attempts to mimic the output of a proper 5-piece surround system, but it’s not particularly successful. It does widen the image considerably, as well as add some height, but without actual speakers behind you, you’re not going to be fooled.

You get two HDMI inputs, one HDMI output, a digital input, a 3.5mm analog stereo input, and a USB port for playing back unprotected MP3 and WMA music tracks. Other Samsung Speakers See More + Please enable JavaScript to view the comments powered by Disqus. blog comments powered by Disqus. ForumComputer Brands 491 answers Last reply Aug 8, 2010 More about compaq presario r3000 power cord issue Can’t find your answer ? Ask ! 1 /10 2 3 4 5 6 Next Last Ask a new question Compaq Presario Power Computer Computers. When I try it, the blue light goes solid for about a minute or two, then starts flashing, and the a red light comes on. I have made 3 attempts always with the same result. You will see a message appear on the sound bar. Attach the cable from its output on the component to the «Digital Audio In» port on the rear of the receiver, and press the «Function» button on the Samsung remote control to select the «D. In» input to access the audio. 7 Press «Power» on the remote control. Unfortunately, the audio connections are on the bottom of the subwoofer’s rear panel, which makes setup a pain. Place the two surround speakers parallel to the listening position, slightly above ear level, and the subwoofer on the floor anywhere in the room. 3 Connect the speaker cables to the individual speakers, matching the black wire to the black terminal, and red to red.

Now, thanks to you, our subwoofer is working again as it should. This will disable the “Mute”function, and bring the sound back. Dialog sounded smooth and well separated, if a bit brittle. The above content is provided for entertainment and information purposes only. However, if the link indicator does not light when the Sound bar and subwoofer are both powered on, follow the steps below to set the ID and link. Still the issue is…. We would like the system to work. Cons Input ports are located on the subwoofer’s back panel, which is tough to reach.

The two front speakers should be parallel to the TV, also at ear level, roughly 6 to 8 feet apart. Model number 500C has an apparatus blank instead of a dial. Please try again now or at a later time. If you believe this post is offensive or violates the CNET Forums’ Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed. Samsung produces a wide array of home entertainment and electronics products, and among those are a line of surround-sound home theater systems with varying degrees of capabilities, features and options. Rage Against the Machine’s «Fistful of Steel» had plenty of tight bass punch, but the rest of the instruments sounded closed in and recessed. Used these instructions and it worked on the first try. Fortunately, in this mode, you don’t need the speaker cabling; that’s only if you want to separate the two halves for a wider stereo image. However, this procedure is a bit expanded.So first to explain what going on here: the subwoofer’s linking ID is set at the factory so the Sound bar and subwoofer should link automatically when the Sound bar is powered on.

This was working for a couple of years and now all of a sudden it just shut itself off. Some bases are marked 500 P, some 500 U and some 500 P/U. • Many TouchTone models have similar numbers, with a prefix of 1, 2 or 3, e.g. 15nn x/y. (See the appropriate site page for touch tone models. Reply This was helpful (0) Collapse — sub woofer isue i did the above suggestion in order but the blue led light won’t stop blinking and i never saw a flash on the sound bar as i pushed the mute button on the remote for 5 seconds. Post a reply Discussion is locked You are reporting the following post: Samsung HW-C450 problem with subwoofer This post has been flagged and will be reviewed by our staff. Includes HDMI, coaxial, and analog connectivity, plus wall-mounting hardware and speaker stands. But as can be expected with such a thin speaker bar, you can hear a bit of a hole in the frequency range between where the subwoofer’s response levels off above roughly 120Hz, and where the satellites begin taking over. The real treasure is to find an early set where all the dates match!) • WE also made specials for large customers (e.g. Howard Johnson). • Exclusion keys were wired for many purposes, including ringer cut-off, extension station cutoff, etc. Yes. To deactivate your remote control, press “Mute” and “Select” simultaneously until the indicator light flashes.

Next turn the sound bar on and the sub should automatically connect.The above directions had this step reversed. The 500 P/U base was used to make the 500P or 500U sets, both of which have dials. More often found in catalogs and on the boxes. (See photo of 500UR-59 above.) * Set wired for 1A1 or 1A2, (typically found on 500L/M or keysets), e.g. 500M* (Photo from David Haber) ? (in table entries) = Model identified, but feature description and reference still needed. The bar is now sitting ON the subwoofer, it started about 2 feet awayany other tips? Thanks, Mike_in_Maryland Reply This was helpful (0) Collapse — Subwoofer not Working I have the same problem and can not get the sub-woofer to reconnect. All information included herein is subject to change without notice. Reply This was helpful (0) Collapse — its alive again Thank you. I’ve followed these clear instructions and it works again x Reply This was helpful (0) Collapse — What can we do? Usually x=manual version (no dial) and y=with dial. Results in Samsung Mixed System Home Speakers and Subwoofer1-25 of 35View all resultsGot one to sell?Get it in front of 160+ million buyers.You May Also LikeShowing slide {CURRENT_SLIDE} of {TOTAL_SLIDES} — You May Also LikeTell us what you think — opens in new window or tab. These commissions do not affect how we test, rate or review products. To find out more, read our complete terms of use.

Can sound a little thin and bright with music. Those would be the silver and black metal wall mount brackets, along with some screws. With the two soundbar pieces connected, the right side houses a giant volume knob, with a Power button and surrounding LED light in the center. Note that caps were often changed in refurb, so are not a reliable indicator of handset plastic material.

When the Link LED turns a solid blue this indicates the subwoofer and Sound bar are now linked.If the subwoofer does not link to the Sound bar, repeat steps 1-4 above to retry the connection after decreasing the distance between the main unit and the wireless subwoofer. For this review, we did the majority of testing with the soundbar assembled as a single piece and used in wireless mode. For a short time in the 1950s, when color was new, dials and occasionally bases had a color code. The box contains a ton of parts, including some that go «clank» when they fall onto the floor. Purchased the same sound bar via Amazon for Christmas. Reply This was helpful (1) Collapse — Here’s an expanded set of instructions Hey All and More Recently, TillyNam,There are instructions in your manual for the procedure that I’ll list out below. Performance and ConclusionsIn addition to the subwoofer’s amp, additional built-in amplifiers deliver 80 watts to each of the two front channels.

Похожие записи: